Kepco KLR Series Developers Guide Manual de usuario Pagina 122

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 128
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 121
B-20 KLR-DEV 060713
B.77 SYSTem:COMMunication:LAN:IP COMMAND SYST:COMM:LAN:IP
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:IP {w,x,y,z}
Long Form: SYSTem:COMMunication:LAN:IP {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Specifies the IP address when DHCP (see PAR. B.69) is set to OFF. (Note that IP address must be
comma-separated.)
B.78 SYSTem:COMMunication:LAN:IP? QUERY SYST:COMM:LAN:IP?
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:IP? Long Form: SYSTem:COMMunication:LAN:IP?
Return Value: <int_value> {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Indicates the static IP address (comma separated).
B.79 SYSTem:COMMunication:LAN:MAC? QUERY SYST:COMM:LAN:MAC?
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:MAC? Long Form: SYSTem:COMMunication:LAN:MAC?
Return Value: xx,xx,xx,xx where xx = hex character pairs
Description: Return the MAC address of the unit. For example, MAC address of 01-23-45-67-89-AB returns
01,23,45,67,89,AB.
B.80 SYSTem:COMMunication:LAN:MASK COMMAND SYST:COMM:LAN:MASK
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:MASK {w,x,y,z}
Long Form: SYSTem:COMMunication:LAN:MASK {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Specifies the MASK address when DHCP (see PAR. B.69) is set to OFF. (Note that MASK address
must be comma-separated.)
B.81 SYSTem:COMMunication:LAN:MASK? QUERY SYST:COMM:LAN:MASK?
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:MASK? Long Form: SYSTem:COMMunication:LAN:MASK?
Return Value: <int_value> {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Indicates the static MASK address (comma separated). For example, mask of 255.255.255.0
returns 255,255,255,0.
B.82 SYSTem:COMMunication:SERial:BAUD COMMAND SYST:COMM:SER:BAUD
[STANDARD MODELS ONLY]
Syntax: Short Form: SYST:COMM:SER:BAUD {38400 | 19200 | 9600 | 4800 | 2400}
Long Form: SYSTem:COMMunication:SERial:BAUD {38400 | 19200 | 9600 | 4800 | 2400}
Description: Sets the unit to operate at the specified baud rate. Factory default is 38400.
B.83 SYSTem:COMMunication:SERial:BAUD? QUERY SYST:COMM:SER:BAUD?
[STANDARD MODELS ONLY]
Syntax: Short Form: SYST:COMM:SER:BAUD?
Long Form: SYSTem:COMMunication:SERial:BAUD?
Return Value: <int_value> {38400 | 19200 | 9600 | 4800 | 2400}
Description: Indicates baud rate.
Vista de pagina 121

Comentarios a estos manuales

Sin comentarios